Extron electronics IN1806 Series User Manual page 69

Scaling presentation switchers, scalers
Table of Contents

Advertisement

X7@
=
Key effect
X8)
=
Audio playback file slot number
X8@
=
Playback state
X8#
=
Repeat
X8$
=
Playback delay
X8%
=
Configuration type
X8^
=
Number of open connections
X8&
=
IP address
X8*
=
Gateway IP address
X8(
=
Subnet mask
X9)
=
Hardware (MAC) address
X9!
=
Password
X9@
=
Default unit name
X9#
=
Subnet mask in CISG
commands
IN1806 and IN1808 Series Scaling Presentation Switchers • SIS Configuration and Control
0 = Disabled (default)
1 = Transparency
2 = RGB key
3 = Level key
4 = Alpha key
1 through 16
Highest priority for playback is slot 1, descending to
lowest priority slot 16.
0 = Stop or stopped
1 = Play or playing
0 = No
1 = Yes
NOTE:
Setting the repeat mode to 0 during
continuous playback causes play to stop after the
end of the current iteration.
Number of seconds to wait before the audio file repeats
X8#
(valid only if
= 1 [repeat]).
1 through 300 (1-300 seconds delay between audio
playbacks)
0 = No delay
0 = IP configuration (ip.cfg)
2 = Unit-specific parameters (box.cfg)
0-<maximum number of open connections>
Format nnn.nnn.nnn.nnn
Default = 192.168.254.254
Leading zeros in each of the four octets are optional in
setting values, and are suppressed in returned values.
Format nnn.nnn.nnn.nnn
Default = 0.0.0.0
Leading zeros in each of the four octets are optional in
setting values, and are suppressed in returned values.
Format nnn.nnn.nnn.nnn
Default = 255.255.255.0
Leading zeros in each of the four octets are optional in
setting values, and are suppressed in returned values.
00-05-A6-xx-xx-xx
Length is 1-128 characters.
All human-readable characters are allowed except
|
.
The password cannot be a single space.
Passwords are case-sensitive.
A user password cannot be assigned if no
administrator password exists. An E14 error code is
returned.
If the admin password is cleared, the user password
is cleared as well.
Combination of the model name and the last three
hexadecimal character pairs of the unit MAC address
(Example: IN1808-IPCP-SA-15-9E-B0)
Prefix representing subnet mask bits (subnet mask value
in CISG commands).
Default = /24, which represents the default subnet mask,
255.255.255.0.
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

In1808 seriesIn1806In1808In1808 ipcp saIn1808 ipcp ma 70

Table of Contents