Quick Setup Submenu - Extron electronics DTP2 CrossPoint 82 User Manual

Quick Setup Submenu

Figure 19.
The Quick Setup submenu is displayed by default when the OSD is first opened, and
provides quick access to frequently-used settings. This submenu contains the following
items, which also appear on other submenus in the system:
• INn: Input Mode — Displays the video format (such as HDMI/DTP/XTP or DisplayPort)
of the connected input.
• INn: EDID — Press the ƒ and „ buttons to select the resolution or the rate list. Press
>
the
from the resolutions list matches the current output resolution. There are also 10 custom
options, prefaced by C1 through C10.
Output Rate — Press the
•
and refresh rates (see
10 custom options, prefaced by C1 through C10. The default setting is 1080p @ 60 Hz.
• Audio Mute — Press the
(Off) for the audio. The default is Off.
Test Pattern — Press the
•
test patterns off (see
The available test pattern selections are Crop, Alternating Pixels, Crosshatch,
Color Bars, Grayscale, and Audio Test (pink noise). The default setting is Off.
• DHCP Mode — In DHCP mode, the unit is assigned an IP address when it connects to
the network. Press the
(Off) DHCP mode. The default is Off.
• IP Address — Press the ƒ and „ buttons to switch between octets. Press the
>
and
192.168.254.254.
Quick Setup Submenu
< buttons to navigate through the selected list. Selecting Auto (the default)
and
>
and
Output Rate
>
and
>
and
Test Pattern
>
<
and buttons to toggle between enabling (On) and disabling
< buttons to change the value of a selected octet. The default address is
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Operation
< buttons to select from a list of output resolutions
on page 37, on the Output submenu). There are
< buttons to toggle between mute (On) and unmute
< buttons to select a test pattern to display, or to turn
on page 42 on the OSD Advanced submenu).
31