Extron electronics IN1608 HDBT Series Setup Manual

IN1608 HDBT Series • Setup Guide
The Extron IN1608 HDBT Scaling Presentation Switcher is an eight input, HDCP-compliant video scaler that accepts a wide variety of audio and
video formats and provides HDMI and HDBaseT video outputs. This guide allows an experienced user to set up and configure IN1608 HDBT,
IN1608 SA HDBT, IN1608 MA 70 HDBT, IN1608 IPCP SA HDBT, and IN1608 IPCP MA 70 HDBT scalers. It covers how to perform basic operations
using the front panel controls and selected Simple Instruction Set (SIS™) commands.
NOTE:
For full installation, configuration, menus, connector wiring, and operation details, see the IN1606 and IN1608 Series User Guide at
www.extron.com. For installation, configuration, and operation details of the IPCP Pro 350 control processor, see the IPCP Pro Series
User Guide.
Installation
IN1608 Series Rear Panel Connectors
IN1608 IPCP SA HDBT
1
100-240V ~ 1.5 A MAX 3
CONFIGURABLE
2
HDMI
4
50/60 Hz
A B
Power and Input Connections
A
AC power connector
B
Configurable analog 15-pin HD (VGA) connectors (inputs 1 and 2)
C HDMI input connectors (inputs 3 through 6)
D
DTP input and corresponding RS-232/IR Over DTP connectors
(inputs 7 and 8)
E
Analog audio input connectors (associated with inputs 1 through 6)
F Mic/Line audio input connectors and adjacent phantom power LEDs
Figure 1.
IN1608 Series Rear Panel Connectors (IN1608 IPCP SA HDBT Shown)
The IN1608 IPCP HDBT models feature a built-in Extron IPCP Pro 350 control processor for controlling and monitoring a
variety of external devices, such as projectors and lights. See the IPCP Pro Series Setup Guide for more details.
NOTE:
The non-IPCP models have a LAN connector next to the Remote RS-232 connector (see
right) instead of the IPCP Pro 350 control processor.
Mounting and Cabling
Step 1 — Mount the device
a. Turn off or disconnect all equipment power sources.
b. Mount IN1608 HDBT scaler to a rack using the
pre-installed rack ears or use an optional mounting kit
for under-the-desk mounting (see the two images to
the right). The IN1608 HDBT comes in a 1U, full rack
width enclosure. All other IN1608 HDBT models come
in 2U, full rack width enclosures.
COM 1
Tx Rx G RTS CTS Tx Rx
IR/SERIAL
1 2
R
S G S G
5
7 8
RS-232 IR
Tx Rx G Tx Rx
SIG LINK SIG LINK
OVER DTP
HDMI
RS-232 IR
6
DTP IN DTP IN
Tx Rx G Tx Rx
INPUTS
C D
L
LAN 1
COM 2 COM 3 DIGITAL I/O
G Tx Rx G 1 2 3 4 G
RELAYS eBUS
1 2 C 3 4 C + V + S -S G
PWR OUT = 6W
LAN 2 LAN 3
L 1 R
C A
SIG LINK
OVER HDBT
HDMI
L 2 R
RS-232 IR
B
HDBT OUT
Tx Rx G Tx Rx
OUTPUTS
G H
Output Connections
G
HDBaseT output connector and
corresponding RS-232/IR Over
HDBT connector (output C)
H HDMI output connectors
(outputs A and B)
I
Analog audio output connectors
J
Amplified audio output connector
(SA and MA models only)
Rack Ears
Rack Mounting
AMPLIFIED OUTPUT
2x25W(8Ω)/2x50W(4Ω)
3 R L 5 R 1
L 1 2
+48V
MIC/LINE VARIABLE
RESET
L 4 R L 6 R
2 L R
+48V
AUDIO INPUTS OUTPUTS
E F I
Control Connections
K
Remote RS-232
connector
L
IPCP Pro 350 control
processor (IPCP
models only)
M
LAN connector
(non-IPCP models
only)
O OUTPUTS
M to the
1 2
VARIABLE
L R
IN1608 SA HDBT
Mounting Screws
(2) Places
Each Side
#8 Screw
(4) Places
MBU 149
Each Side
Mounting Bracket
Furniture Mounting
J
L R
CLASS 2 WIRING
RS-232
Tx Rx G
REMOTE
K
M
AMPLIFIED OUTPUT
2x25W(8Ω)/2x50W(4Ω)
L R
CLASS 2 WIRING
REMOTE
LAN
RESET RS-232
Tx Rx G
1