Sensor Module Cabinet-Mounted Smc30; Description; Interface Description - Siemens SINAMICS S120 Manual

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Supplementary system components and encoder system integration

8.1 Sensor Modules

Sensor Module Cabinet-Mounted SMC30

The Sensor Module Cabinet-Mounted SMC30 is an expansion module for snapping on to a

standard mounting rail acc. to EN 60715. It evaluates encoder signals and transmits the

speed, actual position, and, if applicable, the motor temperature and reference point via

DRIVE-CLiQ to the Control Unit.

The SMC30 is used to evaluate encoder signals from encoders with TTL, HTL, or SSI

A combination of TTL/HTL signal and SSI absolute signal is possible at terminals

X521/X531, if both signals are derived from the same measured variable.

Interface description of the SMC30

Manual, (GH6), 07/2016, 6SL3097-4AL00-0BP5