Siemens SINAMICS S120 Manual page 118

Power Modules
4.2 Blocksize Power Modules (PM240-2)
Line voltage 1 AC / 3 AC 200 ... 240 V ±10 %
Article No.
without integrated line filter
with integrated line filter
Rated current I covers the load cycle for Low Overload.
1)
n
Rated power of a typical standard induction motor at 230 V.
2)
The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating
3)
(based on I ) for a line impedance corresponding to u
rated
To observe the limit values of EN 61800-3 Category C2, for Power Modules PM240-2 with integrated line filter 50 m
4)
(shielded) is the max. motor cable length. A cable length up to 150 m is possible for C2 if you use an unfiltered Power
Module with an external line filter for Category C2 and a motor reactor.
Power loss in the cabinet: 0.02 kW. The remaining power loss is dissipated through the heat sink.
5)
118
Internal
6SL3210–
1PB13-0UL0
1PB13-0AL0
= 1%.
k
6SL3210–
1PB13-8UL0
1PB13-8AL0
Manual, (GH6), 07/2016, 6SL3097-4AL00-0BP5
Push-through
6SL3211–
1PB13-8UL0
1PB13-8AL0
AC Drive