Commissioning SINAMICS drives
8.5 Commissioning using a drive wizard
Figure 8-24
8. Press "Yes".
Figure 8-25
9. Press the <RECALL> key in order to parameterize/configure the drives in the next step.
See also
Checking/setting power supply data settings (Page 238)
78
Saving the configuration
The data is saved as non-volatile data.
Menu "Infeed > Configuration" "Finish"
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
IBN CNC: NCK, PLC, drive