Commissioning SINAMICS drives
8.5 Commissioning using a drive wizard
3. If required, assign a drive object name or accept the default settings.
4. Follow the drive wizard with the horizontal softkey "Next >".
5. The default values in the following dialogs are standard values and can be taken over
with "Next >".
Figure 8-20
Figure 8-21
76
Menu "Infeed > Configuration" with recognized ALM (Next 1)
Menu "Infeed > Configuration" "Additional data" (Next 2)
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
IBN CNC: NCK, PLC, drive