7.1.2
Inserting a SIMATIC station 300
Introduction
Before you introduce required hardware to the S7 project, the following steps are needed:
● Insert a SIMATIC station 300 in the project
● Starting HW-Config
Operating steps
1. Select <right mouse button> menu "Insert new object > SIMATIC 300-Station".
Figure 7-1
2. Double-click on the symbol <SIMATIC 300 (1)>.
3. Double-click on the symbol <Hardware>.
IBN CNC: NCK, PLC, drive
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
Inserting a SIMATIC station 300
The HW config for introducing required hardware is started.
PLC commissioning
7.1 Creating a SIMATIC S7 project
41