7.5
Triggering a reset (warm restart) for NCK and drive system
Introduction
On the HMI the "Commissioning" menu contains:
Figure 7-16
The STOP condition of the PLC which is taken by the PLC for a short time on loading is
interpreted by the NC as a PLC failure with an appropriate alarm response.
IBN CNC: NCK, PLC, drive
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
7.5 Triggering a reset (warm restart) for NCK and drive system
"Commissioning" menu
PLC commissioning
57