Siemens SINUMERIK 840D sl Commissioning Manual page 224

Tips
13.4 Integrating PG/PC into the network (NetPro)
Operator input sequence steps - Integrating PG/PC into NetPro
Using the following operator input sequence steps, you can integrate a PC/PG into NetPro:
1. Click on the "NetPro" button (see figure above).
2. From the catalog under "Stations", insert the PG/PC via Drag&Drop into the network
configuration (see figure below).
Figure 13-8
The newly inserted symbol PG/PC does not yet contain any interfaces. Next, configure the
interfaces.
224
Insert PG/PC
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
IBN CNC: NCK, PLC, drive