Set Home State - Printronix S828 Programmer's Manual

Programmer Manual
Loaded Font Function Set Vector
Decimal Hex
93-94 5D-5E
95-96 5F-60
97-98 61-62
Bar Code Function Set Vector
Decimal Hex
99-100 63-64
101-102 65-66
103-104 67-68
105-106 69-6A
107-108 6B-6C
109-110 6D-6E
Notes:
1. 4247 native mode.
2. 4224 and 4230 emulation mode.
3. For Limited Simulated Color support, all valid but unsupported color values for text data are accepted
and result in simulation of the specified colors without generation of unsupported color exceptions. In
the S828 Printer, simulation of Color of Medium is done by printing in Color of Medium, except where
not possible because of different resolutions when text overlays graphics, image, or bar code. For
actual colors, all valid colors not listed in the above table are simulated in the S828 Printer by printing
in black.
Set Home State (SHS)
Length D697
This command is valid in any state. When the printer receives the Set Home State command, the current
page ends, all buffered data prints, and the printer returns to the home state. If the printer receives this
command while already in the home state, the printer treats this command as a No Operation command.
Acknowledge Reply (ACK)
Length D6FF
or
Length D6FF
The printer uses the Acknowledge Reply to return device status, sense information, and any additionally
requested information back to the host application program. The application program uses the
Acknowledge data to maintain control of the printing application and to begin error recovery actions when
necessary. The printer sends an acknowledgment:
Chapter 5 IPDS Programming Information
Value Description
0006 Vector Length
C3C6 Loaded Font Function Set Identifier
FF20 Symbol Sets
Value Description
000C Vector Length
C2C3 Bar Code Function Set Identifier
FF10 BC/1 Level Identifier
1001 Unordered Bar Code Blocks Supported
4022 Limited Simulated Color and Color of Medium Supported (see
(see note 1) note 3)
4002
(see note 2)
A0C0 0°, 90° Orientation Supported
Flag Correlation ID (Optional)
00 Data
40 Correlation ID (Optional) Data
122
PTX‐S828
260071‐001A