Printronix S828 Programmer's Manual page 11

Programmer Manual
Index of Command Summary in Alphabetical Order
This section contains a summary of commands used on the Printronix S828 model printer. It is divided into 2
separate sections. "Common commands for the Printronix S828 model printers" lists all the commands
common to all models, the standard ASCII and the one with Intelligent Print Data Stream (IPDS) option
installed.
"Commands for the Printronix S828 model printer with the IPDS feature present commands that can only be
used when the IPDS option installed.
Common commands for the Printronix S828 model printers
Command
BEL
BEL
BS
BS
CAN
CAN
CR
CR
DC1
DC1
DC1
DC2
DC2
DC3
DC3
DC4
DC4 DC4 ESC !
DC4 DC4 ESC (GS
DC4 DC4 ESC @
DC4 DC4 ESC 1
DC4 DC4 ESC 3 1
DC4 DC4 ESC 3 3
DC4 DC4 ESC 3 4
DC4 DC4 ESC 3 6
DC4 DC4 ESC 3 8
DC4 DC4 ESC A
DC4 DC4 ESC D
DC4 DC4 ESC g
DC4 DC4 ESC J
DC4 DC4 ESC N
DC4 DC4 ESC p
DC4 DC4 ESC R
DC4 DC4 ESC r
DC4 DC4 ESC S
DC4 DC4 ESC T
DC4 DC4 ESC u
Contents
Description
Buzzer (IBM/EPSON).
Bell (ANSI).
Print and space back one position (IBM/EPSON).
Back space (ANSI).
Cancels line. (EPSON)
Cancels data. (IBM)
Prints all received data and the column counter is set to the left margin
IBM/EPSON)
Carriage return (ANSI).
Selects printer. (IBM)
Selects printer. (EPSON)
Selects printer (Data Control 1) (ANSI)
Sets 10 cpi printing. (IBM)
Cancels compressed printing. (EPSON)
Deselects printer. (EPSON)
Deselects printer (Data Control 3) (ANSI)
Cancels double width printing (IBM/EPSON)
Bar Code Selection
Prints bar code symbols.
Re-initializes the printer.
Sets vertical spacing n/180 inch.
Sets vertical spacing 12 lines/30 mm.
Sets vertical spacing to 3 lines/30 mm.
Sets vertical spacing 4 lines/30 mm.
Sets vertical spacing 6 lines/30 mm.
Sets vertical spacing 8 lines/30 mm.
Sets the horizontal spacing to 15, 17.1, 20 CPI.
Sends the operator panel messages to the serial I/F.
Selects LQ fonts.
Sets amplification factor.
Selects/loads or parks the fanfold from the Front 2 path.
Sets quality printing.
String rotation.
Digit rotation.
Selects character set ISO Character Sets or Code Pages.
Selects/loads or parks the fanfold from the Front1 path.
Selects the user macros.
9
PTX-S828
Page
51
83
51
76
49
49
17
76
49
50
82
29
29
50
82
29
60
66
66
57
57
57
57
58
58
58
68
58
66
67
59
67
67
59
67
68
260071-001A