Selects The Score Line. (Ibm 2381 + Only) - Printronix S828 Programmer's Manual

Programmer Manual
d2 Line
0 Cancel score line
1 Single continuous line
2 Double continuous line
5 Single broken line
6 Single broken line
Any combination of scoring may be used at the same time and are independent of each other. Graphics
characters are not scored.
ESC[-

Selects the score line. (IBM 2381 + only)

ASCII Code
Hexadecimal Value
Decimal Value
Range
This command selects several forms of overscore, underscore, and strikethrough.
To select loc: To select type:
loc Selection
1 Underscore
2 Strikethrough
3 Overscore
ESC :
Sets 12 CPI. (IBM)
ASCII Code
Hexadecimal Value
Decimal Value
This is a terminator code. It causes all data present in the print buffer to be printed. Subsequent data is
printed at 12 cpi. This command is accepted at any position within the line. The setting of another
horizontal spacing resets this command.
ESC <
Prints characters for one line from left to right. (IBM XLIII, EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
This command causes the printing of one line from left to right.
Chapter 1 EPSON/IBM Commands
ESC [ - n1 n2 loc type
X'1B' X'5B' X'2D' n1 n2 loc type
27 91 45 n1 n2 loc type
n1 =2
n2 =0
type Selection
0 Cancles Line
1 Single Line
2 Double Line
255 Cancels all score selections
ESC :
X'1B' X'3A'
27 58
ESC <
X'1B' X'3C'
27 60
31
PTX‐S828
260071‐001A