Printronix S828 Programmer's Manual page 399

Programmer Manual
Intelligent Mail Bar Code 4-state with Epson/IBM Emulations Commands
(Alt. 1 Bar Code Mode)
See chapter 1, pages 54, 55 for details of these commands.
Remark: these commands are not handled in DEC emulations.
ESC [ v n m
Sets Barcode parameters. (IBM -Epson)
ASCII Code
Hexadecimal Value
Decimal Value
Set barcode parameters according to the table below. Parameter values that are not supported result in
the command being ignored.
n Parameter Description
0 Barcode style IMB 4-state
2 Human readable line
8 Rotation and HRC font
11 HRC font for rotate barcode
Intelligent Mail Bar Code 4-state with MTPL Commands
(Native Bar Code Mode)
ESC [ 9 SP k CR
Sets bar code parameters (BC).
ASCII Code
Hexadecimal Value
Decimal Value
In next pages a specific sub-chapter describes the MTPL (Mannesmann-Tally Printer Language) commands
which can be handled by S828 printer.
Appendix I Configuration Menu Lockout
ESC [ vnm
X'1B' X'5B' X'76' nm
27 91 118 nm
ESC [ 9 SP k CR
X'1B' X'5B' X'39' X'20' X'6B' X'0D'
27 91 57 32 109 13
m values
X '22', 34 dec
0=disable
1, 21 =enable below barcode
81, A1 =enable above barcode
0.1=no rotation and current font for HRC
2=90 3=180 4=270 and special HRC font
3=OCRA 4=OCRB
397
PTX‐S828
260071‐001A