Printronix S828 Programmer's Manual page 123

Programmer Manual PTX‐S828
Notes:
1. 4247 native mode.
2. 4224 and 4230 emulation mode.
3. For Limited Simulated Color support, all valid but unsupported color values for text data are accepted
and result in simulation of the specified colors without generation of unsupported color exceptions. In
the S828 Printer, simulation of Color of Medium is done by printing in Color of Medium, except where
not possible because of different resolutions when text overlays graphics, image, or bar code. For
actual colors, all valid colors not listed in the above table are simulated in the S828 Printer by printing
in black.
Image Function Set Vector
Decimal Hex Value Description
55-56 37-38 000C Vector Length
57-58 39-3A C9D4 Image Function Set Identifier
59-60 3B-3C FF10 IM/1 Level Identifier
61-62 3D-3E 1001 Unordered Image Blocks Supported
63-64 3F-40 4022 Limited Simulated Color and Color of Medium Supported
65-66 41-42 1000 Optimum Performance if Image Blocks in Ordered Page
Graphics Function Set Vector
Decimal Hex Value Description
67-68 43-44 000C Vector Length
69-70 45-46 E5C7 Graphics Function Set Identifier
71-72 47-48 FF20 GR/2 Level Identifier
73-74 49-4A 1001 Unordered Graphics Blocks Supported
75-76 4B-4C 4022 Limited Simulated Color and Color of Medium Supported
77-78 4D-4E A080 Zero Degree (°) Orientation Supported
Page Segment Function Set Vector
Decimal Hex Value Description
79-80 4F-50 0006 Vector Length
81-82 51-52 D7E2 Page Segment Function Set Identifier
83-84 53-54 FF10 Page Segment Function Set Level Identifier
Overlay Function Set Vector
Decimal Hex Value Description
85-86 55-56 0008 Vector Length
87-88 57-58 D6D3 Overlay Function Set Identifier
89-90 59-5A FF10 OL/1 Level Identifier
91-92 5B-5C 1505 5 Levels of Nested Overlays in Overlay State
Chapter 5 IPDS Programming Information 121 260071‐001A