Vertical Movements - Printronix S828 Programmer's Manual

Programmer Manual
ESC H or HTS
Horizontal tab setting.
ASCII Code
Hexadecimal Value
Decimal Value
This command causes a horizontal tab stop to be set to the decipoint value of the current print position.
ESC [ p1; pn u
Sets horizontal tab stops at specified positions multiple horizontal tab set (HTS).
ASCII Code
Hexadecimal Value
Decimal Value
This command sets up to 22 horizontal tab stops at each decipoint position specified by p parameters.
When specifying more than one position, enter the parameters in ascending order.

Vertical Movements

LF
Line feed.
ASCII Code
Hexadecimal Value
Decimal Value 10
This code positions the paper one line space as indicated by the current line spacing value.
ESC D or IND
Index.
ASCII Code
Hexadecimal Value
Decimal Value
This command causes the paper to be positioned down one line space as indicated by the current line
spacing value.
ESC E or NEL
Next line.
ASCII Code
Hexadecimal Value
Decimal Value
This command causes the paper to be positioned down one line space as indicated by the current line
spacing value. The column counter is reset to the left margin value.
Chapter 3 ANSI Emulation Commands
ESC H or HTS
X'1B' X'48' (7-bit) or X'88' (8-bit)
27 72 (7-bit) or 136 (8-bit)
ESC [ p1; pn u
X'1B' X'5B' p1 X'3B' pn X'75'
27 91 p1 59 pn 117
LF
X'0A'
ESC D or IND
X'1B' X'44' (7-bit) or X'84' (8-bit)
27 68 (7-bit) or 132 (8-bit)
ESC E or NEL
X'1B' X'45' (7-bit) or X'85' (8-bit)
27 69 (7-bit) or 133 (8-bit)
78
PTX‐S828
260071‐001A