Load Copy Control - Printronix S828 Programmer's Manual

Programmer Manual
● OCR-B Code Page and FGID 0003 are only valid in combination together.
● The following Code Pages are not available with FGID X'00A0' (PSM)
– Code Page 290 Katakana
– Code Page 293 APL (4224)
– Code Page 310 APL
– Code Page 420 Arabic
– Code Page 833 Korean
– Code Page 838 Thai
– Code Page 880 Cyrillic (Old)
– Code Page 1002 DCF Compatibility
– Code Page 1025 Cyrillic Multilingual
– Code Page 1097 Farsi
Load Copy Control (LCC)
Length D69F
The Load Copy Control command controls the production of output from subsequently received input
logical pages. The LCC command is only valid while the printer is in the home state. This command
remains in effect until the printer receives the next LCC.
The format of the data field (DATA) for this command is:
Decimal Hex
0 0
1 1
2-n 2-n
Notes:
1. Group Count is the number of bytes in this group definition entry. Valid ranges are from 2 to 36 (X'02'
to X'24') in units of 2.
2. Subsequent LCC commands nullify previous Overlay IDs or Suppression IDs from previous LCC
commands.
Copy Modification is an optional modification keyword list made up of two byte controls:
● The first byte is the keyword.
● The second byte is the associated parameter for this keyword.
Valid values for copy modification are:
● C100 - Simplex Printing
● D101 to D1FF - Suppression ID
● E101 to E1FE - Overlay ID.
Simplex Printing is printing on only one side of the document. This is the only type of printing the S828
Printer can perform.
Suppression ID allows the later suppression of text data. The first byte of the keyword, D1, specifies this
keyword as suppression. The second byte of the keyword specifies a suppression identifier. Valid
suppression ID values are 01 to FF. Print suppression occurs as follows:
Chapter 5 IPDS Programming Information
Flag Correlation ID (Optional)
Value
02-24
01
XXXX
Data
Description
Copy Subgroup Count (See Note 1)
Number of Copies
Copy Modification (See Description)
C100 = Simplex
D101 - D1FF = Suppression ID
E101 - E1FE = Overlay ID
126
PTX‐S828
260071‐001A