Printronix S828 Programmer's Manual page 79

Programmer Manual
ESC [ p1 '
Horizontal position absolute (HPA).
ASCII Code
Hexadecimal Value
Decimal Value 27 91 p1 96
This command causes the print position to be moved to the decipoint location specified by p1. This
sequence can be used to print within the left, top, and bottom margins.
ESC [ p1 a
Horizontal position relative (HPR).
ASCII Code
Hexadecimal Value
Decimal Value
This command moves the print position to the right, relative to the current position. The p1 parameter
specifies the number of decipoints. This command cannot be used to move beyond the right margin.
ESC [ p1; p2 s
Left/right margin set (SLR).
ASCII Code
Hexadecimal Value
Decimal Value
This command sets the left and right margin values. The p1 parameter specifies the decipoint value of the
left margin. The p2 parameter specifies the decipoint value of the right margin value. The default value for
the left margin is 0. The value for the right margin is the maximum width supported by the printer
configuration (that is 13.6*720=9792).
ESC [ p1 j
Horizontal position backward (HPB).
ASCII Code
Hexadecimal Value
Decimal Value
This command causes the current horizontal position to be moved backwards as specified by the p1
parameter (decipoints).
HT
Horizontal tab.
ASCII Code
Hexadecimal Value
Decimal Value
This code causes the print head to be moved to the next tab stop.
Chapter 3 ANSI Emulation Commands
ESC [ p1 '
X'1B' X'5B' p1 X'60'
ESC [ p1 a
X'1B' X'5B' p1 X'61'
27 91 p1 97
ESC [ p1; p2 s
X'1B' X'5B' p1 X'3B' p2 X'73'
27 91 p1 59 p2 115
ESC [ p1 j
X'1B' X'5B' p1 X'6A'
27 91 p1 106
HT
X'09'
9
77
PTX‐S828
260071‐001A