11. Tighten the pinch bolt at the under bracket.
Torque the bolt to specification.
Tightening torque
38 Nm (3.8 m-kg,27 ft-lb)
12. Tighten the cap bolt to specification, use the
special tool.
Tightening torque:
20 Nm (2.0 m-kg, 14 ft-lb)
13. Tighten the pinch bolts at the handle crown.
Torque the bolts to specification.
Tightening torque.
20 Nm (2.0 m-kg, 14 ft-lb)
14. Install
the horn cover onto the under
bracket.
15. To install the front wheel, reverse the re-
moval procedure.
Refer to "FRONT WHEEL" on page 5-1.
124