SECTION VIEW
Specifications
Main jet
Pilot jet
Pilot air jet
Pilot screw
Float valve seat
Engine idle speed
WARNING:
The pilot screw settings are adjusted for maximum
performance at the factory with special equipment.
DO NOT attempt to change these settings. If all other
engine systems are functioning correctly, any
changes will decrease performance and cause in-
creased exhaust emissions.
(Front) #122.5
(Rear)
#127.5
#60
#130
Preset
01.8
1,300 ±50 r/min.
Disassembly
1. Remove the two starter link securing
screws, and remove the starter link and
starter levers from the carburators.
1.
Starter link
2. Starter lever
102