Ip Dns Proxy; Ip Helper-Address - Planet Networking & Communication WGSW-48040HP Command Manual

L2+ 48-port 10/100/1000t 802.3at poe + 4-port shared 100/1000x sfp managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for WGSW-48040HP:
Table of Contents

Advertisement

<HEX-VALUE>
Hex values in 64 octets
Default:
None
Usage Guide:
To configure Vendor ID and info of DHCP Server
Example:
To configure Vendor ID and info as below table of DHCP Server for pool "planetbestswitch"
Switch# configure terminal
Switch (config)# ip dhcp pool planetbestswitch
Switch (config-dhcp-pool)# vendor class-identifier "0x8" specific-info 0x8

4.2.54 ip dns proxy

Command:
ip dns proxy
ip
Internet Protocol
dns
Domain Name System
proxy
DNS proxy service
Default:
Disabled
Usage Guide:
To enable DNS proxy.
Example:
To enable DNS proxy.
Switch# configure terminal
Switch (config)# ip dns proxy

4.2.55 ip helper-address

Command:
ip helper-address <Ip : ipv4_ucast>
Command Guide of WGSW-48040HP
-174-

Advertisement

Table of Contents
loading

Table of Contents