Dot1X System-Auth-Control; Dot1X Timeout Quiet-Period; Dot1X Timeout Tx-Period - Planet Networking & Communication WGSW-48040HP Command Manual

4.2.32 dot1x system-auth-control

Command:
dot1x system-auth-control
Default:
Disable
Usage Guide:
To enable 802.1X service for Network Access Server
Example:
To enable 802.1X service for Network Access Server
Switch# configure terminal
Switch (config)# dot1x system-auth-control

4.2.33 dot1x timeout quiet-period

Command:
dot1x timeout quiet-period <10-1000000>
quiet-period Time in seconds before a MAC-address that failed authentication gets a new authentication chance.
Default:
10
Usage Guide:
To configure 802.1X hold time for Network Access Server
Example:
To configure 802.1X hold time(12 seconds) for Network Access Server
Switch# configure terminal
Switch (config)# dot1x timeout quiet-period 12

4.2.34 dot1x timeout tx-period

Command:
dot1x timeout tx-period <1-65535>
tx-period The time between EAPOL retransmissions.
Command Guide of WGSW-48040HP
-62-