Show Snmp Community V3; Show Snmp Host - Planet Networking & Communication WGSW-48040HP Command Manual

4.20.92 show snmp community v3

Command:
show snmp community v3 [ <community> ]
show Show running system information
snmp Display SNMP configurations
community Community
v3 SNMPv3
<Community : word127>
Default:
N/A
Usage Guide:
To display the SNMPv3 Community information.
Example:
To display the SNMPv3 Community information
Switch # show snmp community v3
Community
Source IP : 0.0.0.0
Source Mask : 0.0.0.0
Community
Source IP : 0.0.0.0
Source Mask : 0.0.0.0

4.20.93 show snmp host

Command:
show snmp host [ <conf_name> ] [ system ] [ switch ] [ interface ] [ aaa ]
show Show running system information
snmp Display SNMP configurations
host Set SNMP host's configurations
<ConfName : word32>
aaa AAA event group
interface Interface event group
switch Switch event group
system System event group
Specify community name
: public
: private
Name of the host configuration
Command Guide of WGSW-48040HP
-366-