force-unauthorized
mac-based
multi
single
Default:
Force-authorized
Usage Guide:
To configure Port-control mode for 802.1X
Example:
To configure Port-Based 802.1X(Auto) mode for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # dot1x port-control auto
4.2.45.14 dot1x radius-qos
Command:
dot1x radius-qos
dot1x
radius-qos
Default:
Disable
Usage Guide:
To enable RADIUS-assigned QoS for 802.1X
Example:
To enable RADIUS-assigned QoS for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # dot1x radius-qos
Port access is not allowed
Switch authenticates on behalf of the client
Multiple Host 802.1X Authentication
Single Host 802.1X Authentication
IEEE Standard for port-based Network Access Control
Enables/disables per-port state of RADIUS-assigned QoS.
Command Guide of WGSW-48040HP
-76-