4.2.82 lacp system-priority
Command:
lacp system-priority <1-65535>
lacp
LACP settings
system-priority
System priority
<1-65535>
Priority value, lower means higher priority
Default:
32768
Usage Guide:
To configure LACP system-priority.
Example:
To configure LACP system-priority (99).
Switch# configure terminal
Switch (config)# lacp system-priority 99
4.2.83 line
Command:
line { <0~16> | console 0 | vty <0~15> }
line
Configure a terminal line
<0~16>
List of line numbers
console
Console terminal line
vty
Virtual terminal
Default:
N/A
Usage Guide:
To enter line mode
Example:
To enter line mode (vty 1)
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)#
Command Guide of WGSW-48040HP
-193-