Usage Guide:
To configure shutdown time interval of Loop Protection
Example:
To configure shutdown time interval (888) of Loop Protection
Switch# configure terminal
Switch (config)# loop-protect shutdown-time 888
4.2.100 loop-protect transmit-time
Command:
loop-protect transmit-time <0-10>
loop-protect
Loop protection configuration
transmit-time
Loop protection transmit time interval
<1-10>
Transmit time in second
Default:
5
Usage Guide:
To configure Transmission Time of Loop Protection
Example:
To configure Transmission Time (8) of Loop Protection
Switch# configure terminal
Switch (config)# loop-protect transmit-time 8
4.2.101 mac address-table aging-time
Command:
mac address-table aging-time <0,10-1000000>
mac
MAC table entries/configuration
address-table
MAC table entries/configuration
<0,10-1000000>
Aging time in seconds, 0 disables aging
Default:
300
Command Guide of WGSW-48040HP
-210-