Radius-Server Timeout; Rmon Alarm - Planet Networking & Communication WGSW-48040HP Command Manual

Switch# configure terminal
Switch (config)# radius-server retransmit 5

4.2.153 radius-server timeout

Command:
radius-server timeout <Seconds : 1-1000>
radius-server Configure RADIUS
timeout Time to wait for a RADIUS server to reply
<Seconds : 1-1000>
Default:
5
Usage Guide:
To configure the timeout of Radius-Server
Example:
To configure the timeout (10) of Radius-Server
Switch# configure terminal
Switch (config)# radius-server timeout 10

4.2.154 rmon alarm

Command:
rmon alarm <id> {<oid_str> | {{ ifInOctets | ifInUcastPkts | ifInNUcastPkts |
ifInDiscards | ifInErrors | ifInUnknownProtos | ifOutOctets | ifOutUcastPkts |
ifOutNUcastPkts | ifOutDiscards | ifOutErrors } <ifIndex>}} <interval: 1-2147483647>
{ absolute | delta } rising-threshold <rising_threshold: -2147483648-2147483647>
[<rising_event_id:
-2147483648-2147483647>
both ] }
rmon Remote Monitoring
alarm Configure an RMON alarm
<oid_str> MIB object to monitor
ifInDiscards The number of inbound packets that are discarded even
Wait time in seconds
0-65535>]
[ <falling_event_id: 0-65535> ] { [ rising | falling |
Command Guide of WGSW-48040HP
falling-threshold <falling_threshold:
-248-
the packets are