Lldp Cdp-Aware; Lldp Med Media-Vlan Policy-List - Planet Networking & Communication WGSW-48040HP Command Manual

L2+ 48-port 10/100/1000t 802.3at poe + 4-port shared 100/1000x sfp managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for WGSW-48040HP:
Table of Contents

Advertisement

To enable LACP timeout type (slow) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # lacp timeout slow

4.2.45.45 lldp cdp-aware

Command:
lldp cdp-aware
lldp
LLDP configurations
cdp-aware
Configures if the interface shall be CDP aware (CDP discovery information is added to the LLDP neighbor
table)
Default:
Passive
Usage Guide:
To configure MIB variable retrieve local info or remote info of LLDP for specific interface
Example:
To configure MIB variable retrieve (local info) of LLDP for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # lldp cdp-aware

4.2.45.46 lldp med media-vlan policy-list

Command:
lldp med media-vlan policy-list <v_range_list>
lldp
LLDP configurations
med
Media Endpoint Discovery
media-vlan
Media VLAN assignment
policy-list
Assignment of policies
<v_range_list> Policies to assign to the interface
Default:
Command Guide of WGSW-48040HP
-92-

Advertisement

Table of Contents
loading

Table of Contents