Show Ipv6 Mld Snooping Mrouter; Show Ipv6 Neighbor - Planet Networking & Communication WGSW-48040HP Command Manual

MLD Snooping is disabled to stop snooping MLD control plane.
Multicast streams destined to unregistered MLD groups will be flooding.

4.20.51 show ipv6 mld snooping mrouter

Command:
show ip igmp snooping mrouter [ detail ]
show Show running system information
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
mrouter Multicast router port status in MLD
detail Detail running information/statistics of MLD snooping
Default:
N/A
Usage Guide:
To display the MLD Router Port information.
Example:
To display the MLD Router Port information.
Switch # show ipv6 mld snooping mrouter
MLD Snooping is enabled to start snooping MLD control plane.
Switch-1 MLD Router Port Status
Gi 1/1: Static and Dynamic Router Port

4.20.52 show ipv6 neighbor

Command:
show ipv6 neighbor [ interface vlan <vlan_list> ]
show Show running system information
ipv6 IPv6 configuration commands
neighbor IPv6 neighbors
interface Select an interface to configure
Command Guide of WGSW-48040HP
-332-