hybrid
Change PVID for hybrid port
egress-tag
Egress VLAN tagging configuration
all
Tag all frames
none
No egress tagging
except-native
Tag all frames except frames classified to native VLAN of the hybrid port
Default:
Untagged Port VLAN
Usage Guide:
To configure Egress Tagging VLAN mode for specific interface
Example:
To configure Egress Tagging VLAN mode (None) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid egress-tag none
4.2.45.123 switchport hybrid ingress-filtering
Command:
switchport hybrid ingress-filtering
switchport
Switching mode characteristics
hybrid
Change PVID for hybrid port
ingress-filtering
VLAN Ingress filter configuration
Default:
Enabled
Usage Guide:
To enable Ingress-filtering with Hybrid VLAN mode for specific interface
Example:
To enable Ingress-filtering with Hybrid VLAN mode for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid ingress-filtering
Command Guide of WGSW-48040HP
-135-