Show Snmp View - Planet Networking & Communication WGSW-48040HP Command Manual

Command:
show snmp user [ <username> <engineID> ]
show Show running system information
snmp Display SNMP configurations
user User
<Username : word32>
<Engiedid : word10-32>
Default:
N/A
Usage Guide:
To display the SNMP User information.
Example:
To display the SNMP User information.
Switch # show snmp user
User Name
Engine ID
Security Level
Authentication Protocol : None
Privacy Protocol

4.20.98 show snmp view

Command:
show snmp view [ <view_name> <oid_subtree> ]
show Show running system information
snmp Display SNMP configurations
view MIB view configuration
<ViewName : word32>
<OidSubtree : word255>
Default:
N/A
Usage Guide:
To display the SNMP viewer information.
Security user name
Security Engine ID
: default_user
: 800007e5017f000001
: NoAuth, NoPriv
: None
MIB view name
MIB view OID
Command Guide of WGSW-48040HP
-372-