Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos trust dscp
4.2.45.103 qos trust tag
Command:
qos trust tag
qos
Quality of Service
trust
Trust configuration
tag
VLAN tag
Default:
Disabled
Usage Guide:
To enable VLAN tag Classification of QoS for specific interface
Example:
To enable VLAN tag Classification of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos trust tag
4.2.45.104 rmon collection history
Command:
rmon collection history <1-65535> buckets <1-65535> interval <1-3600>
rmon
Configure Remote Monitoring on an interface
collection
Configure Remote Monitoring Collection on an interface
history
Configure history
buckets
Requested buckets of intervals. Default is 50 buckets
interval
Interval to sample data for each bucket. Default is 1800 seconds
Default:
N/A
Usage Guide:
Command Guide of WGSW-48040HP
-124-