Switchport Forbidden Vlan Add - Planet Networking & Communication WGSW-48040HP Command Manual

L2+ 48-port 10/100/1000t 802.3at poe + 4-port shared 100/1000x sfp managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for WGSW-48040HP:
Table of Contents

Advertisement

<vlan_id>
VLAN ID of the VLAN when this port is in access mode
Default:
1
Usage Guide:
To configure access VLAN ID for specific interface
Example:
To configure access VLAN ID (5) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport access vlan 5

4.2.45.118 switchport forbidden vlan add

Command:
switchport forbidden vlan add <vlan_list>
switchport
Switching mode characteristics
forbidden
Adds or removes forbidden VLANs from the current list of forbidden VLANs
vlan
Add or modify VLAN entry in forbidden table.
add
Add to existing list.
<vlan_list>
VLAN IDs
Default:
1
Usage Guide:
To add forbidden VLAN ID for specific interface
Example:
To add forbidden VLAN ID (5) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport forbidden vlan add 5
Command Guide of WGSW-48040HP
-132-

Advertisement

Table of Contents
loading

Table of Contents