Switch# configure terminal
Switch (config)# rmon alarm 1 .1.3.6.1.2.1.2.2.1.10.15 50 absolute rising-threshold
1000 1 falling-threshold 520 1 falling
4.2.155 rmon event
Command:
rmon event <id: 1-65535> [ log ] [ trap <community> ] { [ description <description> ] }
rmon
Remote Monitoring
event
Configure an RMON event
<id: 1-65535>
Event entry ID
description
Specify a description of the event
<description>
Event description
log
Generate RMON log when the event fires
trap
Generate SNMP trap when the event fires
<community>
SNMP community string
Default:
None
Usage Guide:
To configure the Event of RMON
Example:
To configure the Event (below table) of RMON
Switch# configure terminal
Switch (config)# rmon event 1 log trap planet description error
4.2.156 sfp temperature-threshold
Command:
sfp temperature-threshold <0-100>
sfp temperature-threshold
<0-100>
Specifies the new threshold temperature.
Set a lower high temperature threshold for the secondary
temperature alarm in degrees C.
-250-
Command Guide of WGSW-48040HP