Show Port-Security Port; Show Port-Security Switch - Planet Networking & Communication WGSW-48040HP Command Manual

Switch # show platform phy status interface GigabitEthernet 1/1
Port Issues seen during 1G PHY warmstart
---- -----------------------------------
1

4.20.73 show port-security port

Command:
show port-security port [ interface ( <port_type> [ <port_type_list> ] ) ]
show Show running system information
port-security port-security
port Show MAC Addresses learned by Port Security
interface Search by port
Default:
N/A
Usage Guide:
To display the MAC Addresses of Port Security.
Example:
To display the MAC Addresses of Port Security.
Switch # show port-security port interface GigabitEthernet 1/1
GigabitEthernet 1/1
-------------------
MAC Address
-----------------
<none>

4.20.74 show port-security switch

Command:
show port-security switch [ interface ( <port_type> [ <port_type_list> ] ) ]
show Show running system information
port-security port-security
switch Show Port Security status
No
VID State Added
---- ---------- -------------------------
Command Guide of WGSW-48040HP
Issues during 10G PHY WS
------------------------
No
-349-
Age/Hold Time
-------------