Dot1X Guest-Vlan Supplicant; Dot1X Max-Reauth-Req - Planet Networking & Communication WGSW-48040HP Command Manual

Switch (config)# dot1x guest-vlan 2

4.2.30 dot1x guest-vlan supplicant

Command:
dot1x guest-vlan supplicant
supplicant The switch remembers if an EAPOL frame has been received on the port for the life-time of the port. Once the
switch considers whether to enter the Guest VLAN, it will first check if this option is enabled or disabled.
Default:
Disable
Usage Guide:
To allow all frames automatically entering guest-vlan for Network Access Server
Example:
To allow all frames automatically entering guest-vlan for Network Access Server
Switch# configure terminal
Switch (config)# dot1x guest-vlan supplicant

4.2.31 dot1x max-reauth-req

Command:
dot1x max-reauth-req <1-255>
Default:
2
Usage Guide:
To define 802.1X re-authentication frequency for Network Access Server
Example:
To define 802.1X re-authentication frequency with 78 times for Network Access Server
Switch# configure terminal
Switch (config)# dot1x max-reauth-req 78
Command Guide of WGSW-48040HP
-61-