Mvr Vlan; Network-Clock Synchronization Ssm - Planet Networking & Communication WGSW-48040HP Command Manual

Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # mvr name 111 type source

4.2.45.64 mvr vlan

Command:
mvr vlan <v_vlan_list> type [source | receiver ]
mvr Multicast VLAN Registration configuration
vlan MVR multicast vlan
<vlan_list> MVR multicast VLAN list
type MVR port role configuration
receiver MVR receiver port
source MVR source port
Default:
Inactive
Usage Guide:
To configure port role of specific MVR VLAN ID for specific interface
Example:
To configure port role (source) of MVR VLAN ID (111) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # mvr name 111 type source

4.2.45.65 network-clock synchronization ssm

Command:
network-clock synchronization ssm
network-clock network-clock
synchronization
ssm SSM enable/disable.
Default:
Disable
SSM enable/disable.
Command Guide of WGSW-48040HP
-102-