Cartridge Disassembly - KTM 400 EXC AUS 2011 Repair Manual

Ol/FORK, TRIPLE CLAMP
19
- Remove upper sliding bushing
II.
• Info
I
Gently pull them apart without using any tool.
200658-01
- Take off the lower sliding bushing
e.
- Take off support
ring •.
- Take off seal ring
e.
- Take off lock ring
e.
- Take
off
dust boot
e.
- Take out the fork leg.
Cartridle disassembl
• Info
I
The steps are identical for both fork legs.
- Disassemble the fork legs. (-- p. 16)
- Remove fluid barrier
0
from the piston rod.
I
Clamping stand (Tl4016S) (-- p. 265)
- Remove piston rod • from the cartridge.
200747-10
- Remove washer
e
and spring seat. from the cartridge.
200748-10
Ol/FORK, TRIPLE CLAMP
19
- Remove upper sliding bushing
II.
• Info
I
Gently pull them apart without using any tool.
200658-01
- Take off the lower sliding bushing
e.
- Take off support
ring •.
- Take off seal ring
e.
- Take off lock ring
e.
- Take
off
dust boot
e.
- Take out the fork leg.
Cartridle disassembl
• Info
I
The steps are identical for both fork legs.
- Disassemble the fork legs. (-- p. 16)
- Remove fluid barrier
0
from the piston rod.
I
Clamping stand (Tl4016S) (-- p. 265)
- Remove piston rod • from the cartridge.
200747-10
- Remove washer
e
and spring seat. from the cartridge.
200748-10