Removi Ng The Stato; Installing The Stato - KTM 400 EXC AUS 2011 Repair Manual

3911GNITION SYSTEM
Removinl the stator
- Replace the ignition pulse generator.
Condition
The alternator cover has been removed.
- Remove screw. and take off the cable holder.
- Remove cable support sleeve. from the alternator case.
- Remove screws •.
- Take the stator out of the alternator cover.
- Position the stator in the alternator cover.
- Mount and tighten screws
O.
Guideline
Screw, stator bracket M6 10 Nm
(7.4lbfft)
- Position cable support sleeve. in the alternator case.
- Position the cable holder. Mount and tighten
screw •.
Guideline
Screw, cable holder in
alternator cover
M4 4Nm
(3 Ibf It)
192
Loctile- 243'"
Loctilee 243'"
3911GNITION SYSTEM
Removinl the stator
- Replace the ignition pulse generator.
Condition
The alternator cover has been removed.
- Remove screw. and take off the cable holder.
- Remove cable support sleeve. from the alternator case.
- Remove screws •.
- Take the stator out of the alternator cover.
- Position the stator in the alternator cover.
- Mount and tighten screws
O.
Guideline
Screw, stator bracket M6 10 Nm
(7.4lbfft)
- Position cable support sleeve. in the alternator case.
- Position the cable holder. Mount and tighten
screw •.
Guideline
Screw, cable holder in
alternator cover
M4 4Nm
(3 Ibf It)
192
Loctile- 243'"
Loctilee 243'"