Disassembling The Pislon Rod - KTM 400 EXC AUS 2011 Repair Manual

04LSHOCK ABSORBER, SWINGARM
200762-10
- Remove adjusting ring
e
with the intermediate washer.
- Remove compression damping adjuster
e.
Remove the spring and piston.
- Disassemble the damper.
(or
p. 45)
- Clamp the piston rod with the fork in a bench vise.
- Remove nut
O.
• Info
I
If mount
e
is loosened, apply counteractive force.
- Remove rebound damping shim stack
e.
• Info
I
Guide the rebound damping shim stack onto a screwdriver and put them
aside together.
- Remove piston ••
- Remove compression damping shim stack
e.
• Info
I
Guide the compression damping shim stack onto a screwdriver and put
them aside together.
- Unscrew and remove mount
e.
- Remove rebound damping shim stack
e.
• Info
I
Guide the rebound damping shim stack onto a screwdriver and put them
aside together.
46
04LSHOCK ABSORBER, SWINGARM
200762-10
- Remove adjusting ring
e
with the intermediate washer.
- Remove compression damping adjuster
e.
Remove the spring and piston.
- Disassemble the damper.
(or
p. 45)
- Clamp the piston rod with the fork in a bench vise.
- Remove nut
O.
• Info
I
If mount
e
is loosened, apply counteractive force.
- Remove rebound damping shim stack
e.
• Info
I
Guide the rebound damping shim stack onto a screwdriver and put them
aside together.
- Remove piston ••
- Remove compression damping shim stack
e.
• Info
I
Guide the compression damping shim stack onto a screwdriver and put
them aside together.
- Unscrew and remove mount
e.
- Remove rebound damping shim stack
e.
• Info
I
Guide the rebound damping shim stack onto a screwdriver and put them
aside together.
46