14/Lighting System, Instruments; Adjusting The Speedometer Lunctions; Setting Kilometers Or Miles - KTM 400 EXC AUS 2011 Repair Manual

14/LIGHTING SYSTEM, INSTRUMENTS
98
AdJLIIII!!J1h1 splldomlltlr functions
• Info
I
When the vehicle is delivered, only the SPEEDIH and SPEEDIUDO display modes are activated.
,"
~~~:O1ll2 Al
112 U
11m!I1IO
IlXI UIP CUtH
400318-01
kilomlltlrs or miles
• Info
Condition
The motorcycle is stationary.
- Press the button 0 briefly and repeatedly until H appears at the bottom right of the
display.
- Press the button
Q
for 3 - 5 seconds.
. / The Setup menu is displayed and the activated functions are shown.
- Change to the desired function by pressing the button
~
briefly.
, / The selected function flashes.
Activlting a function
- Press the button
. / The symbol remains on the screen and the display changes to the next
function.
Deactivating the lunction
- Press the button
, / The symbol on the screen goes out and the display changes to the next
function.
- All desired functions are activated or deactivated accordingly.
- Press the button
Q
for 3 - 5 seconds .
. / The settings are stored and the Setup menu is closed.
• Info
I
If no button is pressed for 20 seconds, or if a pulse arrives from the wheel
speed sensor, the settings are stored automatically and the Setup menu is
closed.
I
If you change the unit of measure, the ODD value is retained and converted accordingly.
The values TRI, TR2, AI, A2 and 51 are cleared when the unit of measure is changed.
1111
1lI2 Al 112 ~ 52
III III
~.
KmnI
IIti
E
1--\---1-1-
IlXI UIP CUtH
400329-01
Condition
The motorcycle is stationary.
- Press the button 0 briefly and repeatedly until H appears at the bottom right of the
display.
- Press the button 0 for 3 - 5 seconds.
, / The Setup menu is displayed and the active functions are shown.
- Press the button
Q
repeatedly until the KmIhIMph display flashes.
Adjusting Kmih
- Press the button
Adjusting Mph
- Press the button
- Press the button 'CI for 3 - 5 seconds.
, / The settings are stored and the Setup menu is closed.
• Info
I
If no button is pressed for 20 seconds, or
if
no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
14/LIGHTING SYSTEM, INSTRUMENTS
98
AdJLIIII!!J1h1 splldomlltlr functions
• Info
I
When the vehicle is delivered, only the SPEEDIH and SPEEDIUDO display modes are activated.
,"
~~~:O1ll2 Al
112 U
11m!I1IO
IlXI UIP CUtH
400318-01
kilomlltlrs or miles
• Info
Condition
The motorcycle is stationary.
- Press the button 0 briefly and repeatedly until H appears at the bottom right of the
display.
- Press the button
Q
for 3 - 5 seconds.
. / The Setup menu is displayed and the activated functions are shown.
- Change to the desired function by pressing the button
~
briefly.
, / The selected function flashes.
Activlting
a
function
- Press the button
. / The symbol remains on the screen and the display changes to the next
function.
Deactivating the lunction
- Press the button
, / The symbol on the screen goes out and the display changes to the next
function.
- All desired functions are activated or deactivated accordingly.
- Press the button
Q
for 3 - 5 seconds .
. / The settings are stored and the Setup menu is closed.
• Info
I
If no button is pressed for 20 seconds, or if a pulse arrives from the wheel
speed sensor, the settings are stored automatically and the Setup menu is
closed.
I
If you change the unit of measure, the ODD value is retained and converted accordingly.
The values TRI, TR2, AI, A2 and 51 are cleared when the unit of measure is changed.
1111
1lI2 Al 112 ~ 52
III III
~.
KmnI
IIti
E
1--\---1-1-
IlXI UIP CUtH
400329-01
Condition
The motorcycle is stationary.
- Press the button 0 briefly and repeatedly until H appears at the bottom right of the
display.
- Press the button 0 for 3 - 5 seconds.
, / The Setup menu is displayed and the active functions are shown.
- Press the button
Q
repeatedly until the KmIhIMph display flashes.
Adjusting Kmih
- Press the button
Adjusting Mph
- Press the button
- Press the button 'CI for 3 - 5 seconds.
, / The settings are stored and the Setup menu is closed.
• Info
I
If no button is pressed for 20 seconds, or
if
no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.