KTM 400 EXC AUS 2011 Repair Manual page 55

04LSHOCK ABSORBER, SWINGARM
- Mount seal ring retainer. and slide it under the ring groove.
- Mou nt lock ri ng •.
• Info
I
Do not scratch the inner surface.
- Pull out the piston rod in order that the seal ring retainer fits closely against the
lock ring.
- Mount locking cap. of the damper cartridge.
- Bleed and fill the damper. ( .. p. 56)
- Fill the damper with nitrogen. ( .. p. 5B)
- Mount rubber cap. of the reservoir.
- Turn adjusting ring. completely down toward the bottom.
Alternative 1
55
- Turn adjusting screw. clockwise with a screwdriver up to the last perceptible
click.
- Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Compression damping, low-speed
Comfort 22 clicks
Standard 20 clicks
Sport 15 clicks
- Turn adjusting screw. clockwise with an open end wrench until it stops.
- Turn back counterclockwise by the number of turns corresponding to the shock
absorber type.
Guideline
Compression damping, high-speed
Comfort 2 turns
Standard 1.5 turns
Sport
1.25 turns
- Turn adjusting screw. clockwise up to the last perceptible click.
- Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Rebound damping
Comfort 26 clicks
Standard 24 clicks
Sport 22 clicks
04LSHOCK ABSORBER, SWINGARM
- Mount seal ring retainer. and slide it under the ring groove.
- Mou nt lock ri ng •.
• Info
I
Do not scratch the inner surface.
- Pull out the piston rod in order that the seal ring retainer fits closely against the
lock ring.
- Mount locking cap. of the damper cartridge.
- Bleed and fill the damper. ( .. p. 56)
- Fill the damper with nitrogen. ( .. p. 5B)
- Mount rubber cap. of the reservoir.
- Turn adjusting ring. completely down toward the bottom.
Alternative 1
55
- Turn adjusting screw. clockwise with a screwdriver up to the last perceptible
click.
- Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Compression damping, low-speed
Comfort 22 clicks
Standard 20 clicks
Sport 15 clicks
- Turn adjusting screw. clockwise with an open end wrench until it stops.
- Turn back counterclockwise by the number of turns corresponding to the shock
absorber type.
Guideline
Compression damping, high-speed
Comfort 2 turns
Standard 1.5 turns
Sport
1.25 turns
- Turn adjusting screw. clockwise up to the last perceptible click.
- Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Rebound damping
Comfort 26 clicks
Standard 24 clicks
Sport 22 clicks