Disassembling The Damper - KTM 400 EXC AUS 2011 Repair Manual

04LSHOCK ABSORBER, SWINGARM
45
Disassemblin the damper
- Remove the spring.
( r
p. 44)
- Note down the present state of rebound damping 0 and compression damping
e.
- Completely open the adjustment elements of the rebound damping and compres-
sion damping.
- Remove rubber cap
e
of the reservoir.
- Slowly unscrew screw
e.
, / The pressurized nitrogen is bled off.
- Remove locking cap
e.
- Press seal ring retainer
e
all the way in with the special tool.
I
Disassembly tool (Tl216)
(r
p. 264)
- Remove lock ring
e.
• Info
I
Do not scratch the inner surface.
- Take out the damper.
- Remove screw
e.
Drain the oil.
200757-10
- Remove the piston rod. Drain the remaining oil.
200758-10
04LSHOCK ABSORBER, SWINGARM
45
Disassemblin the damper
- Remove the spring.
( r
p. 44)
- Note down the present state of rebound damping 0 and compression damping
e.
- Completely open the adjustment elements of the rebound damping and compres-
sion damping.
- Remove rubber cap
e
of the reservoir.
- Slowly unscrew screw
e.
, / The pressurized nitrogen is bled off.
- Remove locking cap
e.
- Press seal ring retainer
e
all the way in with the special tool.
I
Disassembly tool (Tl216)
(r
p. 264)
- Remove lock ring
e.
• Info
I
Do not scratch the inner surface.
- Take out the damper.
- Remove screw
e.
Drain the oil.
200757-10
- Remove the piston rod. Drain the remaining oil.
200758-10