Removing The Crankshaft - KTM 400 EXC AUS 2011 Repair Manual

301DISASSEMBLING THE ENGINE
117
- Pull out both transmission shafts together from the bearing seats.
• Info
I
Do not lose the washers.
RemDYinl tile crankshaft
- Attech the special tool to the crankshaft.
I
Protection cover (75029090000) (-- p. 259)
- Mount special tool
0
onto the engine case with suitable screws.
I
Removal tool (78029049100) (-- p. 2611
- Press the crankshaft out of the bearing seat.
- Take out crankshaft .
- Remove the special tools.
- Take off the right section of the engine case.
301DISASSEMBLING THE ENGINE
117
- Pull out both transmission shafts together from the bearing seats.
• Info
I
Do not lose the washers.
RemDYinl tile crankshaft
- Attech the special tool to the crankshaft.
I
Protection cover (75029090000) (-- p. 259)
- Mount special tool
0
onto the engine case with suitable screws.
I
Removal tool (78029049100) (-- p. 2611
- Press the crankshaft out of the bearing seat.
- Take out crankshaft .
- Remove the special tools.
- Take off the right section of the engine case.