Removing The Water Pump; Installing The Water Pump - KTM 400 EXC AUS 2011 Repair Manual

301ENGINE - WORK ON THE INDIVIDUAL PARTS
122
- Remove nut
o.
- Remove lock ring
e.
Take off the drive wheel.
- Take
off
water pump impeller
e
and the spacing washer.
• Info
I
If the water pump impeller cannot be detached, then the water pump shaft
can be pressed out toward the inside.
- Remove water pump shaft
e.
- Remove shaft seal ring
e.
- Remove shaft seal ring
e.
- Press out water pump shaft bearing
e
with an appropriate tool.
• Info
I
Provide suitable support for the clutch cover while pressing out.
- Press water pump shaft bearing 0 in flush using the appropriate tool.
• Info
I
Provide suitable support for the clutch cover while pressing in.
301ENGINE - WORK ON THE INDIVIDUAL PARTS
122
- Remove nut
o.
- Remove lock ring
e.
Take off the drive wheel.
- Take
off
water pump impeller
e
and the spacing washer.
• Info
I
If the water pump impeller cannot be detached, then the water pump shaft
can be pressed out toward the inside.
- Remove water pump shaft
e.
- Remove shaft seal ring
e.
- Remove shaft seal ring
e.
- Press out water pump shaft bearing
e
with an appropriate tool.
• Info
I
Provide suitable support for the clutch cover while pressing out.
- Press water pump shaft bearing 0 in flush using the appropriate tool.
• Info
I
Provide suitable support for the clutch cover while pressing in.