Use the Esc key to receive Views on the F5 key. Choose System from the pull-down
menu. Use the F2 key (Configure) to select the DAD or MWD. Here you define
further special setpoints for the DAD or MWD operation.
Use the F1 key (Interfaces) to access the interface settings (if required ).
Screens available from the Records screen
Records screen
Use the Esc key to receive Views on the F5 key. Choose System from the pull-down
menu. Use the F4 key (Records) to select the DAD or MWD. Errors are reported either
into the System Log (F2) or Error Log (F3).
1100 Series DAD and MWD Reference Manual
Control Module Screens for Agilent 1100 DAD and MWD
271
7