Optional Interface Boards; Bcd Board - Agilent Technologies 1100 Series Reference Manual

6 Introduction to the Detector
Mode
none
apex
apex + baselines
apex + slopes
apex + slopes + baselines
all in peak
all 2nd in peak
all
all second

Optional Interface Boards

The Agilent 1100 Series modules have one optional board slot that allows addition of
an interface board to the modules.
Table 33
Description

BCD Board

Fuse 250 mA (four are on the board)
244 1100 Series DAD and MWD Reference Manual
Description
no spectra is stored
top of peak spectra is stored
last baseline spectrum before peak, top of peak spectrum and first
baseline spectrum after peak is stored.
spectrum in peak upslope, at top of peak and in peak downslope
is stored.
combined apex + slopes and apex + baselines.
compared to storing all spectra periodically, only stores spectra
within a peak at doubled period. Starts with last baseline
spectrum before peak and ends with first baseline spectrum after
peak. If baseline spectra are not detected, the spectrum before
the first spectrum in peak or the spectrum after the last spectrum
within the peak is stored instead.
only the 2nd spectra of a peak is stored.
periodically all spectra are stored. The period depends on the
peakwidth setting. For peakwidth setting=0 (narrowest peak), the
spectrum data rate would be 20 Hz.
periodically every 2nd spectra is stored (50 % of mode all).

Optional Interface Boards

Part Number
G1351-68701
2110-0004