Agilent Technologies 1100 Series Reference Manual page 193

8
9
10
14
15
16
17
Table 15 lists the specific parts for the 500 nl flow cell.
Table 15
Item
1
2
1
2
1100 Series DAD and MWD Reference Manual
Union Adjustment Tool, used for item #7
ZDV SS Union, no fitting, QTY=2
Torque Adapter
Handle for clamp unit
Clamp unit
Screw M 2.5, 4 mm long for cell body/clamp
Wrench open end 4 mm (supplied with standard accessory
kit
G1315-68705 of your detector)
Specific 500 nl Flow Cell Parts
Description
500 nl Flow Cell Kit
PEEK coated fused silica capillary Inlet (100 µm) pre-
mounted to cell, includes
Inlet capillary, 300 mm long, 100 µm i.d. with pre-fixed
ferrules (#4) and fittings (#3), plus one PEEK
Fitting FT (#5)
PEEK coated fused silica capillary Outlet (100 µm) pre-
mounted to cell, includes
Outlet capillary, 120 mm long, 100 µm i.d. with pre-
fixed ferrules (#4) and fitting (#3), plus one PEEK
Fitting FT (#5)
PEEK coated fused silica capillary Inlet (50 µm)
alternative, includes
Inlet capillary, 400 mm long, 50 µm i.d. with pre-fixed
ferrules (#4) and fittings (#3), plus one PEEK
Fitting FT (#5)
PEEK coated fused silica capillary Outlet (50 µm),
alternative, includes
Outlet capillary, 120 mm long, 50 µm i.d. with pre-fixed
ferrules (#4) and fitting (#3), plus one PEEK
Fitting FT (#5)
Identifying Parts and Materials
193
5
5022-2146
5022-2184
G1315-45003
G1315-84902
G1315-84901
0515-1056
8710-1534
Part Number
G1315-68724
G1315-87333
G1315-87338
G1315-87323
G1315-87328