Clear Pagp - Cisco Catalyst 2960-X Command Reference Manual

clear pagp

clear pagp
To clear the Port Aggregation Protocol (PAgP) channel-group information, use the clear pagp command in
privileged EXEC mode.
clear pagp [channel-group-number] counters
Syntax Description
channel-group-number
counters
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS 15.0(2)EX
Usage Guidelines
You can clear all counters by using the clear pagp counters command, or you can clear only the counters
for the specified channel group by using the clear pagp channel-group-number counters command.
Examples This example shows how to clear all channel-group information:
Switch# clear pagp counters
This example shows how to clear PAgP traffic counters for group 10:
Switch# clear pagp 10 counters
You can verify that the information was deleted by entering the show pagp privileged EXEC command.
Related Commands
Command
show pagp
debug pagp
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
26
(Optional) Channel group number. The range is 1 to 24.
Clears traffic counters.
Modification
This command was introduced.
Description
Displays Port Aggregation Protocol (PAgP) channel-group information.
Enables debugging of PAgP.
Layer 2 Commands
OL-29043 -01