Clear Pagp - Cisco Catalyst 3650 Command Reference Manual

Layer 2/3 Commands

clear pagp

To clear the Port Aggregation Protocol (PAgP) channel-group information, use the clear pagp command in
privileged EXEC mode.
clear pagp [channel-group-number] counters
Syntax Description
channel-group-number
counters
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SE
Usage Guidelines
You can clear all counters by using the clear pagp counters command, or you can clear only the counters
for the specified channel group by using the clear pagp channel-group-number counters command.
Examples This example shows how to clear all channel-group information:
Switch# clear pagp counters
This example shows how to clear PAgP traffic counters for group 10:
Switch# clear pagp 10 counters
You can verify that the information was deleted by entering the show pagp privileged EXEC command.
Related Commands
Command
debug pagp
show pagp
OL-32639-01
(Optional) Channel group number. The range is 1 to 128.
Clears traffic counters.
Description
Enables debugging of PAgP.
Displays Port Aggregation Protocol (PAgP) channel-group information.
Layer 2/3 Command Reference, Cisco IOS XE Release 3.6E (Catalyst 3650 Switch)

clear pagp

Modification
This command was introduced.
25